1. The drive of the water pump is carried out газораспределительным by a belt. The pump приболчен to the block of cylinders from outside drive ГРМ.
2. Empty cooling system (address to the Head Routine maintenance).
3. Remove a belt of drive ГРМ (engine Repair see the Head).
4. Turn out fixing bolts and take assemblage of the pump from the block of cylinders (optimum access opens through a wheel arch). Remove a sealing lining.
Installation
PERFORMANCE ORDER
1. Make sure of absoluteness of cleanliness and dryness of interfaced surfaces of the pump and the block of cylinders.
2. Establish the pump on the regular place (do not forget to replace a lining).
3. Establish a belt of drive ГРМ (the corresponding section of the Head engine Repair see).
4. Fill cooling system (address to the Head Routine maintenance).